Dove Code:
MO6044 |
Manufacturer:
NTC-100-01
Overview
Deliver reliable, cost-effective connectivity to machines and enable remote monitoring, data collection, diagnostics, problem resolution and control across a wide range of key verticals with the NetComm Wireless 4G LTE Cat M1/NB1 Industrial IoT serial modem (NTC-100).
Warranty
12 Month Return to Base Warranty
Features
- Cat-M1 and Cat-NB1 support perfect for transmitting the small amounts of data, providing low power wide area connectivity even in hard to reach areas
- Powerful cellular connectivity supporting 4G LTE
- A 10-pin NANO-fit connector providing a serial interface (RS232 / RS485 / RS422)
- Advanced diagnostics and control to query status information, configure a device and execute various commands via SMS
- Firmware upgrade over the air
- Industrial grade design with wall mount option
Specifications
| Antenna Connectors | 1x SMA Connector |
|---|
| UE Category | Cat M1/NB1
3GPP E-UTRA Release 13 |
|---|
| Cellular Bands | LTE-FDD:
– Band 1 (2100 MHz)
– Band 2 (1900 MHz)
– Band 3 (1800 MHz)
– Band 4 (1700 MHz)
– Band 5 (850 MHz)
– Band 8 (900 MHz)
– Band 12 (700 MHz)
– Band 13 (700 MHz)
– Band 18 (850 MHz)
– Band 19 (850 MHz)
– Band 20 (800 MHz)
– Band 28 (700 MHz)
LTE-TDD:
– Band 39 (1900 MHz, Cat. M1 only)
EGPRS:
– 850 MHz
– 900 MHz
– 1800 MHz
– 1900 MHz |
|---|
| Peak Data Speed | Cat M1:
– 375 Kbps/375 Kbps (Downlink/Uplink)
Cat NB1:
– 32 Kbps/70 Kbps (Downlink/Uplink)
GPRS:
– 107 Kbps/85.6 Kbps (Downlink/Uplink)
EDGE:
– 296 Kbps/236.8 Kbps (Downlink/Uplink) |
|---|
| Interface | 1x SIM card slot (2FF)
1x USB 2.0 (Device only)
– Micro-B receptacle
1x 10-pin NANO-fit (locking) connector providing
Serial interface (RS-232/RS-422/RS-485)
– 15kV RMS Protection |
|---|
| LED Indicators | 2x Tri-colour (Red/Amber/Green) LEDs indicating:
– Power
– Network |
|---|
| Reset Button | Recessed reset button with two functions:
– Reboot
– Reset unit to factory defaults |
|---|
| Modes of Operation | PPP
IP
Advanced diagnostics and control via SMS
– Query status information - such as Signal Strength,
WAN IP, uptime, and many more
– Configure device remotely via SMS such as APN,
authentication settings, and many more
– Execute commands via SMS - such as reboot, reset
to defaults, go offline, and many more
– Secure SMS management using sender whitelisting
and password protection
– SMS acknowledgement replies for queries
and commands |
|---|
| Cellular Connection Management | Profile managed packet data connections
SIM PIN protection
Automatic and manual cellular band selection
Automatic and manual operator selection |
|---|
| Firmware Management | Firmware upgrade locally via USB or remotely
Over-The-Air
Triggered firmware upgrade via SMS
(initiate download & install from FTP) |
|---|
| Power Supply | Power input via 10-pin NANO-fit connector
DC Power input (4.5 – 36 V DC)
Minimum power input rating of 4 W |
|---|
| Temperature & Humidity | Operating temperature range: -30ºC to +70ºC
Storage temperature range: -40ºC to +85ºC
Non-condensing humidity: 5-95% RH @ 60ºC |
|---|
| Enclosure | P40 rated |
|---|
| Dimensions (mm) | 84 (l) x 50 (w) x 21 (d) |
|---|
| Mounting Options | Wall mountable via mounting holes
DIN Rail mount support via included plastic bracket
(Top hat section rail TH 35 IEC60715) |
|---|
See full manufacturer specifications